Pellet Dryer System

Pellet Dryer System1
The Pellet Drying Process takes place in four stages:
  1. Agglomerate removal prevents agglomerates greater than 1/2″ (12.7 mm) from entering the SpinAway Dryer and damaging the rotor blades and screens.
  2. Dewatering removes 90% to 95% of the water which reduces dryer load and increases input rates
  3. SpinAway Dryer removes surface moisture from pellets or recycled plastics.
  4. Forced Air removes water vapor as dry air counter-flows through the pellets as they pass through the top half of the dryer.
Pellet Dryer System1